The APC SRV2KRIRK Easy UPS On-Line is a reliable 2kVA / 1.6kW double-conversion rackmount UPS (2U) designed to deliver continuous, clean power for servers, networks, and critical IT equipment. With a pure sine wave output, LCD display, intelligent management card slot, and included rail kit, it ensures maximum uptime and protection against power disturbances in professional environments.
Key Features
- Double-Conversion (On-Line) Topology
In this design, power always passes through the inverter (AC → DC → AC), isolating the load from input power anomalies (voltage sags, surges, spikes, frequency fluctuations). This offers the highest level of power conditioning and ensures “zero transfer time” to battery in the event of mains failure. - Pure Sine Wave Output
The UPS delivers a pure sine wave when running off battery, suitable for sensitive electronics (servers, network gear, storage, etc.). - Rack-Mount Form Factor (2U)
The SRV2KRIRK is intended to be mounted in standard 19-inch racks (2U height), with included rail kit. - Output & Load Capacity
It supports up to 1.6 kW (1600 W) continuous load, which gives headroom for many servers, networking hardware, storage, and ancillary systems.
It provides multiple IEC C13 outlets (usually 3 or 4) for load connection. - LCD Display & Monitoring
The UPS has a front LCD panel that displays status, load levels, battery charge status, runtime estimates, and alerts. - Smart Slot / Management Card Support
It includes a slot for optional intelligent management or network cards (SNMP, environmental monitoring, remote shutdown) so that it can integrate into centralized monitoring systems. - Battery Runtime & Performance
At ~70% load, the UPS can sustain its load for over 6 minutes (approximate figure depending on battery condition) before switching off.
It also supports automatic restart of connected equipment when mains power is restored. - Bypass / Redundancy Features
The UPS includes a static bypass (no mechanical contactor) that engages in the event of internal failure, ensuring continuity of load power even if the UPS internals fault.
It may also support efficient operating modes that bypass unused internal components when input power is stable to improve efficiency. - Generator Compatibility
The UPS is designed to work with generator input sources, handling fluctuations and ensuring clean output to the protected loads.
| Parameter | Value / Range |
|---|---|
| Apparent Power (VA) | 2 000 VA (2 kVA) |
| Active Power (W) | 1 600 W (1.6 kW) |
| Topology | Double-conversion (on-line) |
| Input / Output Voltage | 230 V nominal |
| Output Connections | 3 × IEC C13 (for battery-backed loads) |
| Output Voltage Range | Typically 220 V to 240 V (depending on load / regulation) |
| Frequency | 50 / 60 Hz ± 3 Hz (sync to mains) |
| Battery & Runtime | Over 6 minutes at 70% load (typical) |
| Rack / Mounting | 2U rack height, includes rail kit |
| Efficiency / Bypass | Has static bypass to maintain continuity in case of UPS internal fault |
| Display & Monitoring | Front LCD display showing status, load, battery charge, alerts, etc. |
| Management / Smart Slot | Includes a slot for optional network / management cards (for SNMP, remote control, environmental monitoring) |
Reviews
There are no reviews yet.