DDS / DPC-LSZHC6BC0.5M / UTP Patch Cord LSZH 0.5M Cat6

DDS / DPC-LSZHC6BC0.5M / UTP Patch Cord LSZH 0.5M Cat6

The Standard Fire-Safe Cat6 Patch Cord for Every Installation

The DDS / DPC-LSZHC6BC0.5M / UTP Patch Cord LSZH 0.5M Cat6 is a premium, fire-safe Cat6 patch cord from DDS — engineered for structured cabling installations in hospitals, schools, data centres, public buildings, and any indoor environment where Low Smoke Zero Halogen (LSZH) compliance is a mandatory safety requirement. Constructed from 24 AWG stranded bare copper with moulded RJ45 plugs at each end, this Category 6 patch cord delivers full Class E performance — supporting 1000BASE-T Gigabit Ethernet and 250 MHz bandwidth across every connection point. Furthermore, the 0.5 M length strikes the perfect balance between minimal slack and practical usability, making it one of the most versatile and widely used patch cord lengths in professional structured cabling deployments. Consequently, it suits patch panel connections, top-of-rack server links, wall outlet terminations, and equipment room cross-connects equally well.

LSZH Jacket — Fire Safety From End to End

The LSZH outer jacket is the defining advantage of the DDS / DPC-LSZHC6BC0.5M over standard PVC patch cords. In the event of a fire, the LSZH compound emits minimal smoke and releases zero toxic halogen gases — protecting building occupants, first responders, and sensitive electronic equipment in enclosed spaces such as server rooms, ceiling voids, and cable risers. Additionally, LSZH compliance satisfies mandatory requirements under many national and international building codes for medical, educational, and commercial premises. Moreover, using LSZH patch cords at every connection point ensures the entire cabling channel — from horizontal cable to patch cord — meets fire safety regulations end to end. Therefore, project inspections, building compliance sign-offs, and insurance documentation all proceed without complications.

Flexible Construction & Universal Compatibility

The 24 AWG stranded bare copper conductors provide the flexibility needed for repeated connect and disconnect cycles throughout the product’s lifetime without conductor fatigue or signal degradation. Furthermore, the cord supports both T568A and T568B wiring schemes, ensuring correct pin-out alignment across all standard patch panels, keystone jacks, and active switch ports in any structured cabling environment. Additionally, the snag-resistant moulded RJ45 boots protect the latch mechanism during repeated insertions and removals, ensuring a secure, professional connection every time. Whether you are cabling a hospital ward, completing a data centre fit-out, dressing a telecommunications room, or finishing the final links in a fire-rated structured cabling system, the DDS / DPC-LSZHC6BC0.5M / UTP Patch Cord LSZH 0.5M Cat6 delivers the fire safety, electrical performance, and build quality your installation demands. To check availability, check our stock. For full official product details, visit the official DDS website.

Key Features:

• LSZH Jacket — Low Smoke Zero Halogen — Emits minimal smoke and zero toxic halogen gases in fire conditions, meeting mandatory LSZH requirements for hospitals, schools, data centres, and public buildings
• Cat6 Class E — 250 MHz / 1 Gbps — Full Category 6 performance supporting 1000BASE-T Gigabit Ethernet and 250 MHz bandwidth across every connection point in the structured cabling channel
• 0.5 M — The Most Versatile Patch Cord Length — Perfect balance of reach and cable management for patch panels, server rack links, wall outlets, and equipment room cross-connects in any installation
• 24 AWG Stranded Copper — Moulded RJ45 Plugs — Flexible stranded conductors for repeated use, with snag-resistant moulded RJ45 boots protecting the latch and delivering a secure, professional finish
• T568A & T568B Compatible — DDS Original — Compatible with both standard wiring schemes for universal use across all patch panels, keystone jacks, and switch ports in any structured cabling system