The TL‑SG1005P‑PD is a compact yet robust PoE-powered switch that’s ideal for powering and connecting devices like IP cameras, access points, and VoIP phones via a single network cable—no external power adapters needed.
Key Features
⚡ PoE-In & PoE-Out Ports
- 1 × Gigabit PoE++ IN port (802.3bt Type 3/4 compatible), allowing the switch itself to be powered directly from another PoE device.
- 4 × Gigabit PoE+ OUT ports (802.3af/at), each delivering up to 30 W.
🔋 Adjustable Power Budget
Total PoE budget varies depending on the input source:
- 66 W when powered by 802.3bt Type 4 (90 W)
- 47 W via 802.3bt Type 3 (60 W)
- 21 W via 802.3at (30 W)
- 9 W via 802.3af (15.4 W)
📏 Long-Range Extend Mode
Enables PoE+ powering up to 250 m on ports 1–2 at reduced 10 Mbps speed—great for distant outdoor cameras.
🔄 PoE Auto Recovery
Automatically reboots unresponsive powered devices, such as IP cameras or APs, restoring connectivity without manual intervention.
🖥️ Hardware & Performance
- 5× RJ45 Gigabit Ports with auto-negotiation and auto-MDI/MDIX for easy setup
- Fanless metal case supports silent operation and desktop or wall mounting.
- Switching capacity: 10 Gbps
- Forwarding rate: 7.44 Mpps
- MAC table: 2K entries
🛠️ Software & Management
- Fully unmanaged, plug‑and‑play: no manual configuration required
- Supports 802.1p/DSCP QoS, ensuring prioritization for voice/IP camera traffic
- Includes IGMP snooping and 802.3x flow control for network efficiency
- Auto-MDI/MDIX simplifies cabling by eliminating crossover concerns
🌡️ Environmental & Physical Specs
- Size: 158 × 101 × 25 mm (6.2″ × 4.0″ × 1.0″)
- Temperature:
- Operating: –30 °C to 70 °C
- Storage: –40 °C to 70 °C
- Humidity: 10–90 % RH non‑condensing; storage 5–90 % RH
- Heat dissipation:
- ~9 BTU/h w/ no PD
- ~233 BTU/h w/ full 66 W load
🛡️ Intelligent Power Management
-
Port priority override ensures critical devices remain powered if overall budget is exceeded—even shutting off lower-priority ports to prevent overload.
🎯 Use Cases & Notes
Ideal for small offices, remote camera setups, or wall-mounted installs where separate power outlets aren’t available.
Reddit users confirm its effectiveness powering UniFi APs like the U6 Pro and outdoor camera setups via PoE‑in chains.
✅ Summary Table
| Feature | Details |
|---|---|
| Ports | 1 PoE++ IN, 4 PoE+ OUT |
| Total Power Budget | Up to 66 W |
| Extend Mode | 250 m reach on ports 1–2 |
| Auto Recovery | Yes |
| Form Factor | Fanless, desktop/wall-mountable |
| Switching Capacity | 10 Gbps / 7.44 Mpps |
🧭 Final Verdict
The TP‑Link TL‑SG1005P‑PD is a smart, compact PoE solution—perfect for powering multiple connected devices with high flexibility, long-range capabilities, and reliable uptime. No configuration worries, full gigabit speeds, plus energy-smart management features make it a strong pick for edge networking needs.
Reviews
There are no reviews yet.