Cisco / CBS350-16FP-2G / 16 Port Gigabit (16 PoE - 240 W) 2 x 1GE SFP Managed Switch

  • LE 32,000.00
    Unit price per 
Shipping calculated at checkout.



  • CBS350-16FP-2G Specification

    Feature

    Description

    Capacity in Millions of Packets per Second (mpps) (64-byte packets)

    26.78

    Switching Capacity in Gigabits per Second (Gbps)

    36.0

    Total System Ports

    18 x Gigabit Ethernet

    RJ-45 Ports

    16 x Gigabit Ethernet

    Combo Ports (RJ45 + Small form-factor pluggable [SFP])

    2 x SFP

    Packet Buffer

    1.5 MB

    Unit dimensions (W x D x H)

    268 x 308 x 44 mm (10.56 x 12.14 x 1.73 in)

    Layer 3

    IPv4 routing

    Wirespeed routing of IPv4 packets

    Up to 990 static routes and up to 128 IP interfaces

    IPv6 routing

    Wirespeed routing of IPv6 packets

    Layer 3 Interface

    Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface

    Classless Interdomain Routing (CIDR)

    Support for classless interdomain routing

    RIP v2

    Support for Routing Information Protocol version 2 for dynamic routing

    Policy-Based Routing (PBR)

    Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)

    DHCP Server

    Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes

    Support for DHCP options

    DHCP relay at Layer 3

    Relay of DHCP traffic across IP domains

    User Datagram Protocol (UDP) relay

    Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets

    Quality of Service

    Priority levels

    8 hardware queues

    Scheduling

    Strict priority and Weighted Round-Robin (WRR)

    Rate limiting

    Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing

    Congestion avoidance

    A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization

    iSCSI traffic optimization

    A mechanism for giving priority to iSCSI traffic over other types of traffic

    Green (power efficiency)

    Energy Detect

    Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up

    Cable length detection

    Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables.

    EEE Compliant (802.3az)

    Supports IEEE 802.3az on all copper Gigabit Ethernet ports

    Disable port LEDs

    LEDs can be manually turned off to save on energy

    Time-based port operation

    Link up or down based on user-defined schedule (when the port is administratively up)

    Time-based PoE

    PoE power can be on or off based on user-defined schedule to save energy

    General

    Jumbo frames

    Frame sizes up to 9K bytes. The default MTU is 2K bytes

    MAC table

    16K addresses

    Hardware

    USB slot

    USB Type-A slot on the front panel of the switch for easy file and image management

    Buttons

    Reset button

    Cabling type

    Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T

    LEDs

    System, Link/Act, PoE, Speed

    Flash

    256 MB

    CPU

    800 MHz ARM

    DRAM

    512 MB

    Environmental

    Storage temperature

    -13° to 158°F (-25° to 70°C)

    Operating humidity

    10% to 90%, relative, noncondensing

    Storage humidity

    10% to 90%, relative, noncondensing

    Warranty

    Limited lifetime with next business day advance replacement (where available)

    Package Contents

    ●  Cisco Business 350 Series Managed Switch

    ●  Power Cord (Power adapter for select 8-port and 16-port SKUs)

    ●  Mounting Kit

    ●  Quick Start Guide



We Also Recommend